Borunte Robot Co., Ltd. is one of the most reliable manufacturers and suppliers of multi axis manipulator arm in China, also supports customized service with low price. Please feel free to wholesale advanced multi axis manipulator arm for sale here from our factory.
BRTR08TDS5PCFC
Manipulator arm details:
The multi axis manipulator arm is ideal for 50T-230T injection molding machines because of its low failure rate, high level of precision, and extended life. It is mostly used for quick injection or complex angle injection and is best suited for long-shape components like those found in the automotive, washing-machine, and household appliance sectors.
Features and functions of multi axis manipulator arm:
Five-axis controller integrated system: fewer signal lines, long-distance communication, good expansion performance, strong anti-interference ability, high accuracy of repeated positioning, can simultaneously control multiple axes, simple equipment maintenance, and low failure rate.
Common problems and solutions :
Phenomenon
1. : Click to ring
Reason: When closing the manipulator, pull the manipulator with your hand, causing the manipulator to shake.
Analysis: The bolt on the joint of the manipulator is loosened due to overload and impact.
Solve: Check whether the bolts of all parts are loose, including motor bolts, reducer bolts and connecting bolts. If so, tighten them.
2. Air pressure is insufficient
Reason: The negative pressure switch indicates insufficient pressure.
Analysis: Check the air pressure of the main air source and whether the air pipe is worn and leaking, or folded.
Solve: Adjust the pressure of the main air source and check the phenomenon of tube breaking.
How to solve the problems may happened in use multi axis manipulator arm :
Error point 1: SubNipOn,SubNipLmtOff
What is the reasons : After vice arm clips, vice clip-confirm signal is still off.
How to solve it? :
Is clip valve on? If yes,
1. Check the clip-confirm signal.
If no,
2. Check clip output signal.
3. Check air pressure.
Error Inform 2 : The wrong number is 01: DaisInAndDaisOutLmtOn
Reasons : Rotate in limit signal and rotate out limit signal are both on.
How to solve it? :
1. Check rotate in/out limit signal.
2. Check connections in IO board.
Hot Tags: multi axis manipulator arm, China multi axis manipulator arm suppliers, manufacturers, factory, 2 Axis Servo Robot, three axis high speed positioning precise manipulator, High Speed Three Axis Single Arm Robot, Large Injection Molding Robot, servo motor robot hand, Industrial Injection Molding Robot Arm