Borunte Robot Co., Ltd. is one of the most reliable manufacturers and suppliers of five axis industrial servo manipulator in China, also supports customized service with low price. Please feel free to wholesale advanced five axis industrial servo manipulator for sale here from our factory.
Five axis Industrial Manipulator
BRTR07WDS5PC/FC
Products Description
Five axis Industrial Servo Manipulator is a horizontal injection machines of 50T-200T for take-out products. The up and down arm is a double sectional type. Manipulator's up and down, drawing, screwing out, and screwing in are driven by AC Servo motor, with high speed and high efficiency. Productivity will be increased by 10-30% and will reduce the defective rate of products, ensure the safety of operators, reduce manpower and accurately control the output to reduce waste.
Main specifications of five axis Industrial Servo Manipulator:
| Model | Power source | Recommended I.M.M | Type of drive | Model og EOAT | Traverse Stroke | Crosswise Stroke | Vertical Stroke | Max loading | Take out time | Cycle time | Air consumption | Net weight |
| BRTP08WSS0PC | 3.32KVA | 50T-200T | AC Servo motor | Four suctions four fixtures | 1300mm |
P: 370 mm R: 370MM |
750 mm | 3 kg | 1.32 second | 4.95 second | 4 | 230kg |
How to solve the problems may happened in use five axis Industrial Servo Manipulator :
Error point 1: SuckOn, SuckLmtOff
Why make this problem?: After main arm sucks on, suck-confirm signal is still off.
How to solve it?: Is vacuum valve on? If yes, 1. Check the suck-confirm signal and the air pressure. If no, 2. Check suck output signal. 3. Check air pressure.
Error point 2: M.NipOn,M.NipLmtOff
What cause that?: After main arm clips, main clip-confirm signal is still off.
How to solve it: Is clip valve on? If yes, 1. Check the clip-confirm signal. If no, 2. Check clip output signal. 3. Check air pressure.
Error point 3: SubNipOn,SubNipLmtOff
What is the reasons? : After vice arm clips, vice clip-confirm signal is still off.
How to solve it : Is clip valve on? If yes, 1. Check the clip-confirm signal. If no, 2. Check clip output signal. 3. Check air pressure.
For more informations and details of Single oblique industrial servo manipulator, please contact us and our tier one providers.
Hot Tags: five axis industrial servo manipulator, China five axis industrial servo manipulator suppliers, manufacturers, factory, Five axis single arm manipulator, servo motor robot hand, three axis high speed positioning precise manipulator, Industrial Injection Molding Robot Arm, 3 axis servo manipulator, Single axis high precision manipulator