Servo Die Casting Rod Soup Ladler

BRTYZGT04S2B

    Servo die casting rod soup ladler employs a new drive control integrated control system that requires less maintenance and has fewer signal lines. It has a convenient mobile hand-held operating teaching pendant that is easy to use and has clear parameter and function settings. A servo motor and RV Reducer power the entire structure, improving stability, accuracy, and efficiency.

      In order to make the die casting rod soup ladler robot can run correctly automatically, each time after turning on the power, must be in the state of stop origin reversion action. The reset action returns the motor shaft of the driving robot to the original position. In the state of Stop, the key and then press the key can be reset to the origin, the motor axis back to the origin position, the origin can be reset after automatic operation and manual operation. When the origin return, the user can not manual, automatic operation and parameter settings of the robot, in case of emergency can press the stop button to stop the origin return or press the emergency stop switch.

Press “ENTER” Select Manual or Automatic Mode.

Manual Mode: Press and hold the “arm forward” button, the robot arm to perform arm forward action (arm forward is the spoon in the horizontal position of 90 degrees), when the release of the button, the robot will stop. The robot must return to the origin before manual mode can be performed.

Note: In Manual Mode, the operating stroke of each axis is limited by the parameter setting and runs between the minimum and maximum values.

Inching mode: The Mode of operation and manual mode of operation has been. The robot can only move in-inch mode before returning to the origin.

Note: The Movement of the Axis in-inch mode is not limited by the parameters set, pay attention to observe the current position of the robot to prevent collision.

For more information about servo die casting rod soup ladler, please contact us or our integretors.

Hot Tags: servo die casting rod soup ladler, China servo die casting rod soup ladler suppliers, manufacturers, factory