6 Kg Collaborative Robot Arm 6 -8 Axis TIG/MIG/Mag Welding Robot Controller Industrial Robot Arm 6 Axis Robot Arm

Our company continues to improve the production process and use of equipment, aiming at continuously improving the quality and performance of Parallel Robot, Flexible Welding Robot, IP65 Of Robot. We focus on the new goal of brand development and focus on enhancing the three major development drivers of innovation, marketing and talent. We rely on strong technical resources, professional management, strong market support and excellent pre-sales and after-sales services, adhering to the principle of openness, cooperation, and win-win, to provide customers with high-quality and efficient products.

BRTIRUS0805A

Product lntroduction

BORUNTE BRTIRUS0805A is a light industrial robot with good dynamic performance and easy to work, which is suitable for a variety of application scenarios. It is the third-generation robot by BORUNTE ROBOT CO,. LTD.

 

Product parameter(specification)

Model	Arm Length(mm)	Loading ability(KG)	Repeatability(mm)	Power Source(KVA)	Net Weight(KG)
BRTIRUS0805A	990	5	±0.05	3.67	About 53

 

Arm	J1	J2	J3	J4	J5	J6
Range	±170°	-98°/+80°	-80°/+95°	±180°	±120°	±360°
Maximum speed	237°/S	267°/S	370°/S	337°/S	600°/S	588°/S

 

Product feature and application

 

● High performance in small space

The longest extension distance is 940 mm, repeat positioning ± 05, six degrees of freedom flexible movement, reduce the dead angle in the space

● Intelligent integrated design

ARM processor and high-speed bus control are adopted to ensure high-speed and efficient data transmission

● A versatile hand in precision operation

Side mounted, upside down, top mounted, all in one, competent for a variety of applications

● External remote control

Support external remote TCP / IP serial communication, realize intelligent programming

● Applicable industry: handling, assembly, measuring and machining

 

Robot zero check

 

● Overview of zero point proofreading

 

Zero calibration is an operation performed to correlate the angle of each robot axis with the encoder count. The purpose of zero calibration operation is to obtain the encoder count value corresponding to the ''zero position'' ''Zero point calibration'' is completed before leaving the factory. In daily operation, it is not necessary to carry out zero calibration operation. However, in the following cases, it is necessary to perform the zero correction operation.

① Replace the motor.

② Encoder replacement or battery failure.

③ Replace the reducer.

④ Cable replacement.

 

● Zero point proofreading method

 

Zero calibration is a complex process. According to the actual situation and objective conditions, the following introduces the tools and methods of zero calibration, some common problems and solutions.

① Software zero point calibration: the laser tracker is needed to establish the robot joint coordinate system, and the system encoder reading is set to zero. The software calibration is more complex and needs to be operated by our professional personnel.

② Mechanical zero point calibration: rotate any two axes of the robot to the preset origin position of the mechanical body, and then put the origin pin in, so as to ensure that the origin pin can be easily inserted and the robot's origin position is stable.

 

Hot Tags: light load six axis robot, China light load six axis robot suppliers, manufacturers, factory, 1 axis servo manipulator, 5 Axis Robot, Lightweight Arm Robot, Heavy three axis servo robot arm, 5 Axis Assembly Robot, robot arm for injection molding machine

We're committed to providing easy, time-saving and money-saving one-stop purchasing service of consumer for 6 Kg Collaborative Robot Arm 6 -8 Axis TIG/MIG/Mag Welding Robot Controller Industrial Robot Arm 6 Axis Robot Arm. The company takes mass production as the premise, quality as the core, and technological innovation and technology research and development as the backing. We attach great importance to the training of employees.