BRTYZGT04S2B
Product lntroduction
2 Axis Die-casting Servo Manipulator is carefully designed by us and made of high-quality raw materials with beautiful appearance, compact structure and stable performance. Our product is mainly used in conjunction with die-casting machines, instead of the whole process of manually taking the soup. It can complete the work of sending an appropriate amount of molten metal soup into the feed barrel or inlet of the die-casting machine.
It is mainly a linkage arm structure, which can brake smoothly even under high-speed operation. 2 Axis Die-casting Servo Manipulator has the characteristics of fast soup out speed and low failure rate. At the same time, it can effectively prevent the overflow of aluminum soup, which is very practical.
Product parameter(specification)
|
Model |
Recommended die casting machine |
Manipulator Motor Drive |
Tableapoon Motor Drive |
Arm reduction ratio |
Ladle reduction ratio |
Max loading |
Recommended tableapoon type |
|
BRTYZGT04S2B |
400T-800T |
1KW |
0.75KW |
RV40E 1:153 |
RV20E 1:121 |
6kg |
4.5kg-6kg |
Parameter settings to the soup machine
Arm stove standby time: automatic soup to the soup machine is completed, the arm back to the top of the furnace waiting time, time to reach, the arm back to the soup for the next cycle.
Soup spoon to take soup Metering time: the soup spoon in the aluminum soup residence time, waiting for aluminum soup filled with spoon.
Soup arm rise time: arm from the soup noodle detection up to the standby point of time setting.
Soup drop time: "arm up time" arrived, the arm stops moving forward, spoon does not move, the excess soup overflow, spoon stop time thus set.
Injection delay time: the robot output to the die-casting machine to allow thimble signal delay time.
Abnormal Backward Timing: The soup arm will advance to the position of the soup.
Wait for the time of the instruction. If the order is not given, the soup arm will retreat to the soup stove.
Soup arm forward position: the end position of the soup arm forward.
Soup arm forward high position: the end of the soup arm forward position and the end of the high-speed soup arm the difference between the end of the position (the lower arm soup arm distance).
Sowing arm high-speed position: Set to 0.
Soup arm forward high speed: soup arm forward high speed set value.
Soup Arm Backward High Speed: The arm arm retracts the high speed setting. Slow arm speed: Slow arm speed setting.
Slow down the speed of the soup arm: Soup arm back low speed limit to the soup face detection speed of the arm back between the arm.
Note the end of the high-speed soup location: high-speed note the end of the location of soup, this position after the default low-speed system.
Spoon level limit: spoon level set value.
Hot Tags: 2 axis die-casting servo manipulator, China 2 axis die-casting servo manipulator suppliers, manufacturers, factory, 2 axis servo manipulator, three axis high speed positioning precise manipulator, Five Axis Single Arm Robot, Three Axis Single Arm Robot, Three Axis High Speed Positioning Precise Robot, 3 axis servo manipulator