BRTR07WDS5PC
Product lntroduction
5 Axis Die-casting Robot is very light and flexible as a whole, with a simple and compact structure, with a vertical stroke of up to 720mm and a load of up to 3KG. Our entire product has been carefully manufactured by us, both in terms of raw materials and production technology, so that it has the characteristics of fault location and accurate positioning. 5 Axis Die-casting Robot has a high degree of automation, which can reduce the defect rate of products and ensure the efficiency and accuracy of production. This robot arm has good expansion performance and strong anti-interference ability, and is widely used in various industries.
Product parameter(specification)
|
Model |
Power Source(KVA) |
Dry Take Out Time(sec) |
Dry Cycle Time(sec) |
Traverse Driven |
Air Consumption(Nl/cycle) |
|
BRTR07WDS5PC |
3.32 |
1.32 |
4.95 |
AC Servo motor |
4 |
Product feature and application
This product is suitable for 50T-200T horizontal injection molding machine's finished products and water outlet to take out.It is especially suitable for the removal of small plastic molds, such as mobile phone keys, shell, window lens and other plastic objects.
Knowledge of product maintenance
Check the oil feed and air pipe of each friction part
1) The track, the track surface dirty tracks, arm, pull out the line track and the track track surface scars or due to lubrication grease lead to dust and other attached stolen goods, dirty tracks, will hinder the smooth operation of the machinery, please remove regularly. In addition, if the surface of the track there is a collision after the scar or other collision injuries. If the rail is found to be seriously damaged, please replace it with a new one. Check whether the oil feeding system is in good condition.
2) The air hose of the pipe is damaged, and the air pipe is broken, which will lead to whether the air pressure (flow) is normal. The joints or the air pipe appear the phenomenon of air leakage.
3) Whether the suction of the vacuum generator and its regulating device and the tracheal end of the vacuum production line device meet the requirements and whether the suction is kept at about -12.5 value. Whether the regulating valve device is in good condition and whether the airflow can be adjusted normally.
Hot Tags: 5 axis die-casting robot, China 5 axis die-casting robot suppliers, manufacturers, factory, Pneumatic Manipulator, Three Axis High Speed Positioning Precise Robot, small high precision 3 axis servo robot arm, 1 Axis Dual Robot, palletizer machine robotic arm, servo motor robot hand