Description

To create far more benefit for customers is our company philosophy; customer growing is our working chase for swing arm manipulator, Lightweight Horizontal Robot, General purpose Injection Molding Robot. Our company will strengthen the production of products, and constantly improve the performance of products. We hope that through our efforts and changes, we can continuously meet the personalized needs of customers and become a good partner worthy of your trust. We create space for our employees to develop and improve their quality of work and life.

BRTYZGT02S2B

Product lntroduction

Die-casting Manipulator is a product with a very simple design. It adopts a brand-new integrated drive and control control system, with fewer signal lines and a small footprint. Our product uses a portable handheld operating device, the parameters and function settings are clear at a glance, and the operation is simple and fast. When the arm is driving, the speed of the arm can be controlled by the knob, and it can be switched between high and low speed. Compared with other robotic arms, Die-casting Manipulator is simpler overall and uses less space.

Product parameter(specification)

Model	Tableapoon Max	Recommended height for smelter	Recommended height for smelter arm	Cycle Time	Main control power	Power Capacity	Dimension
BRTYZGT02S2B	350mm	≤1100mm	≤450mm	6.23s	AC220V/50HZ	1.7KVA	11406801490mm

Basic configuration

1. 4.3 inch color display operation panel;

2. Drive control integrated control box;

3. Power supply; (50 w to 100 w)

4. Servo motor (750W 750W, subject to the actual configuration);

5. Brake resistance;

6. UVW power line, encoder line;

7. Transformer

8. Fan

9. Safety door (out of the machine accessories)

10. Connection of die-casting machine (outgoing accessories)

Matters needing attention

1. Wiring operation must be carried out by professional electricians, and the operation can only start after confirming the power supply is disconnected.

2. Please install it on metal and other flame retardants and stay away from combustible materials.

3. Be sure to connect the grounding terminal with the ground wire, otherwise it will cause electric shock or fire.

4. If the external power supply is abnormal, the control system will fail. In order to make the control system work safely, please be sure to set the safety circuit outside the control system.

5. When installing the electronic board, it should avoid too close to the contactors, frequency converters and other AC devices to avoid unnecessary surge interference.

6. The installation of the controller's electric box, should have good ventilation, oil, dustproof conditions. If the electric control box is closed, it is easy to make the temperature of the controller too high, which will affect the normal work. An exhaust fan must be installed. The appropriate temperature in the electric box is below 50℃, and it should not be used in places with condensation and freezing.

Hot Tags: die-casting manipulator, China die-casting manipulator suppliers, manufacturers, factory, Three Axis Single Arm Robot, High Precision Three Axis AC Servo Industrial Robotic Arm, High Speed Swing Arm Robots, Light Load 6 Axis Robot, Medium Sized General Robot, Industrial Injection Molding Robot Arm

Technical Parameters

We promise to maintain the high quality of our Extractor Robot Precision/Stable/Fast for 1000-1600ton High Pressure Cold Chamber Aluminum Die Casting Machine/Small/Middle/Big/New/Factory Cost from beginning to end, and continue to introduce new ones to create higher value for customers. We build a large enterprise group with the characteristics of "specialization, boutique, integration and informationization". With the aim of 'compete with good quality and develop with creativity' and the service principle of 'take customers' demand as orientation', we will earnestly provide qualified products and solutions and good service for domestic and international customers.