BRTIRUS1510A
Product lntroduction
BRTIRUS1510A is compact and simple in mechanical structure, and can work flexibly in a small working space to meet the needs of flexible production.
Product parameter(specification)
|
Arm |
J1 |
J2 |
J3 |
J4 |
J5 |
J6 |
|
Range |
±165° |
-95°/+70° |
-85°/+75° |
±180° |
±115° |
±360° |
|
Maximum speed |
190°/S |
173°/S |
223°/S |
250°/S |
270°/S |
336°/S |
Product feature and application
Lightweight arm design, compact mechanical structure, simple, in the state of high speed movement ,can be carried out in a small workspace flexible work.
Requirements for installing the robot
● The ambient temperature should be between 0 and 45 ° C (32 to 113 ° F) during operation and -10 to 60 ° C (14 to 140 ° F) during handling and maintenance.
● Must be used in an environment with an average altitude of 0-1000M.
● The humidity must be below the dew point (less than 10% relative humidity).
● Locations with less dust, oil, fumes, and water.
● Flammable materials and corrosive liquids and gases are not allowed in the work area.
● Locations where the vibration or impact energy of the robot is small (vibration below 0.5G).
● There should be no large electrical noise sources (such as gas shielded welding (TIG) equipment), electromagnetic interference sources, and electrostatic discharge.
● There is no potential hazard of collision with moving devices such as forklifts.
Robot installation
● First ensure the robot installation environment and space, and the robot installation location. The plant layout, ground leveling, power supply, etc. of the robot installation should be evaluated first, and then the robot
position should be arranged according to the range of motion described. To ensure that the robot has enough space for movement, if there is a corresponding application space, refer to the instruction manual or contact the supplier to determine whether it can be used safely. Refer to the operating range and parameters of the equipment in the following chapter for details of the robot's motion range.
● After confirming the installation position, use a tool such as a forklift to transport the robot to the installation position. The robot must be firmly fixed in the installation position because the robot itself has a large inertia when moving. If the installation position is not heavy enough or the installation is unstable, it is easy causes the robot to dump excessively due to excessive force, causing unnecessary damage. It may even damage personal safety.
● The safety fence is designed to prevent people from entering the robot's range of motion or colliding with the robot to prevent personal injury.
● After placing the robot and control box, insert the power box control cabinet cable and body. Control cabinet cable plugging Note: First of all, for the power and code socket, gently close the socket and lock it tightly. If the force is too strong, the socket will be damaged. According to the six-axis robot electric box nameplate identification, connect the corresponding power supply. Note that the equipment must be grounded to the ground and ensure good grounding. Finally, insert the teaching box into the control box.
● Other installations and port wiring, please check the relevant information or consult the agent.
Hot Tags: light weight arm robot, China light weight arm robot suppliers, manufacturers, factory, Six Axis Grinding Robot, 5 Axis Robot, 1 axis servo manipulator, palletizing robot arm, High Speed 5 Axis Robot Injection Molding Robot Arm, Five Axis Automatic Intelligent Industrial Robotic Arm