BRTIRUS1510A
Product lntroduction
A robot with six degrees of freedom of flexibility, for loading and unloading, injection molding, die casting, assembly, gluing and other scenarios can be arbitrarily operated and applied. The compact design and outstanding speed, reach and working range of the Medium Sized General Robot make the R series robot suitable for a wide range of applications in many different industries. A general-purpose robot capable of high-speed motion. It can be applied to a wide range of applications such as transportation, assembly, and deburring.
Product parameter(specification)
|
Model |
Arm Length(mm) |
Loading ability(KG) |
Repeatability(mm) |
Power Source(KVA) |
Net Weight(KG) |
|
BRTIRUS1510A |
1500 |
10 |
±0.05 |
5.06 |
About 150 |
Product feature and application
Enterprises can clearly know their daily production capacity and receive orders and produce goods according to their capacity. And not to blindly estimate production or produce too much waste phenomenon. It would also be much easier for factories to manage industrial robots on a daily basis than workers.
Industrial robots can work in a round-the-clock cycle to achieve the maximum output of the production line, and there is no need to pay for overtime hours. For enterprises, it can also avoid employees' long-term fatigue after high intensity work, sick leave and other absenteeism. After the production line is replaced by the industrial robot, the enterprise only needs to leave a few employees who can operate and maintain the industrial robot to carry out the maintenance work on the industrial robot. The economic benefits are very significant.
Inspection of lubricating oil
■ Please measure the concentration of iron powder in lubricating oil of reducer for every 5,000 hours or every year (for loading and unloading purposes, 2500 hours or every six months). If it is necessary to replace the lubricating oil or reducer when it exceeds the standard value, please contact our service center.
■ During maintenance, if more than the necessary amount of lubricating oil flows out of the body, please use the lubricating oil gun to supplement the outflow part. At this time, the nozzle diameter of the lubricating oil gun used should be Φ8mm or less. When the amount of added lubricating oil is more than the outflow amount, it may lead to the leakage of lubricating oil or the poor trajectory of the robot, etc., which should be paid attention to.
■ After maintenance or refueling is completed, in order to prevent oil leakage, sealing tape must be wrapped around the lubricating oil pipe joint and the hole plug before installation. It is necessary to use a lubricating oil gun that can specify the amount of fuel. When it is impossible to prepare the oil gun that can specify the amount of oil, the amount of oil can be confirmed by measuring the change of the weight of the lubricating oil before and after the oil is added.
■ Within a short period of time after the robot has stopped, when the internal pressure rises, the lubricating oil may be ejected at the moment when the manhole screw plug is removed.
Hot Tags: medium sized general industrial robot, China medium sized general industrial robot suppliers, manufacturers, factory, High Quality 5 Axis Servo Robot, General purpose Injection Molding Robot, High speed three axis single arm manipulator, robotic palletizing equipment, High speed 3 Axis Servo Robot, Three Axis High Speed Positioning Precise Robot