BRTIRUS1820A
Pproduct lntroduction
BRTIRUS1820A is a six-axis robot mainly used for workpiece surface grinding, edge deburring, weld grinding, inner cavity and inner hole deburring, etc. Automatizacion Robot is welded neatly, supports one-key start, large touch screen display. It is easy to maintain and easy to operate. It adopts unified adjustment, and its shape can be adjusted freely. It is suitable for different welding machines, saving time and effort. It is mostly used in aerospace, automotive and other industries.
Product parameter(specification)
|
Model |
Arm Length(mm) |
Loading ability(KG) |
Repeatability(mm) |
Power Source(KVA) |
Net Weight(KG) |
|
BRTIRUS1820A |
1850 |
20 |
±0.05 |
5.87 |
About 230 |
Product feature and application
● Closed robot workstation isolates high noise and dust from the outside to reduce environmental pollution
● Operators do not directly contact dangerous processing equipment, to avoid the occurrence of industrial accidents
● The robot can maintain the consistency of product processing accuracy, which not only ensures the reliable quality, but also reduces the rejection rate
First use of robot production attention
● When the robot is used for the first time and the program has been programmed to be ready for production, a safety test is required:
● The test should be run in a single step to confirm whether each point is reasonable and whether there is a risk of impact.
● Reduce the speed to a standard that can be reserved for sufficient time, then run, and test whether the external emergency stop and protective stop are normal use, whether the program logic meets the requirements, whether there is a risk of collision, and need to be checked step by step.
Note: The test procedure must be followed by a single step in the order of the program action.
Precautions of changing robot parts
When changing the robot components, including updating the system software, it is necessary to be operated by a professional, and the test is performed by a professional to meet the usage requirements before being used again. Non-professionals are prohibited from performing such operations.
1. Confirm the operation under power off.
2. Turn off the input power first, then disconnect the output and ground cable.
3. Do not use too much force when disassembling. After replacing the new device, connect the output and ground wire before connecting the input cable.
4. Finally check the line and confirm before power on to testing.
Note: Some key components may affect the running track after replacement. In this case, you need to find the reason, whether the parameters are not restored, whether the hardware installation meets the requirements, etc. If necessary, you may need to return to the factory for calibration to correction for hardware installation errors.
Hot Tags: six-axis automatizacion industrial robot, China six-axis automatizacion industrial robot suppliers, manufacturers, factory, Large 5 axis manipulator, Single axis high precision manipulator, High Quality 5 Axis Servo Robot, small high precision 3 axis servo robot arm, Parallel Robot, Three Axis AC Servo Industrial Manipulator