BRTNN15WSS4PF
Product description:
Four axis fast speed manipulator is a product with a simple structure, stable performance, a vertical stroke of 1500mm and a load of 15KG. The decorative shells of our products are lightweight and increase the overall beauty of curves.
Advantages of BRTNN15WSS4PF:
Four axis fast speed manipulator has fewer signal lines, long-distance communication, good expansion performance, strong anti-interference ability, high repeat positioning accuracy, the ability to control multiple axes simultaneously, is easy to maintain, and has a low failure rate thanks to its four axis drive and control system.
Language：Language Selection:
EjectCtrl：
Not Use：Allow the thimble signal long-term output, Thimble action of injection does not be controlled.
Use ：When the robot began to move, Disconnect thimble signal and start timing,. Allow to output thimble signal after thimble delay time.
ChkMainFixt：
PositPhase：Positive detected fixture switch. Fixture switch signal will be ON when Fetch success in AUTO mode.
ReverPhase：RP to detect fixture switch. Fixture switch signal will be OFF when Fetch success in AUTO mode.
Not Use：Not detect fixture switch. Not detect switch signal no matter what the Fetching action success or not.
ChkViceFixt：The same as Chk ChkMainFixt.
Specific inspection operation of each part of four axis fast speed manipulator:
1) Check whether the machine parts are loose
A, Whether the side posture group is loose
B, Whether the fixing screw is loose
C, Whether the fixture is deformed
2) Maintenance of guide rod and bearing lubrication
A. Clean the guide rod, remove dust and rust
B. Apply the lubricating oil evenly on the guide rod with a brush, so that the lubricating oil is not easy to accumulate
Hot Tags: four axis fast speed manipulator, China four axis fast speed manipulator suppliers, manufacturers, factory