BRTNN15WSS4PF
Product description:
Four axis molding injection manipulator apply for the 470T~800T horizontal moulding injection machine to extract product at a high speed and with a low failure rate. It is powered by an AC servo motor and has a C-servo axis on the wrist with a rotation angle of 90°. It aids in increasing productivity, lowering labor expenses, increasing income, and improving the quality of completed products following installation. It has been shown to assist organizations in increasing productivity and meeting client needs in a timely manner. Its advantages include a straightforward installation procedure, increased manufacturing precision, and speedier output. It simplifies production processes using advanced technology, saving money on manpower and other expenses.
Maintenance safety precautions of four axis molding injection manipulator:
1. The size and quantity of bolts indicated in this book must be precisely followed when installing the accessory parts on the end and manipulator. Bolts must be tightened with a torque wrench to the stated torque, and rusted or dirty bolts must be avoided.
2. When developing and manufacturing the end fixture, it should be controlled within the manipulator's permitted load range.
3. To isolate man from machine, a fault safety protection framework must be used. The retaining object will not be released or fly out even if the power or compressed air source is switched off. To protect people and objects, the corner or protruding section must be handled.
Four axis molding injection manipulator handling matters needing attention:
1. The following content addresses the issues that must be addressed during the manipulator handling operation. Before proceeding, please ensure that you fully comprehend the following information.
2. It mast hook, hoisting, and forklift operations must handle manipulators and controls by personnel certified. Carrying out operations by individuals who lack the necessary expertise might lead to accidents such as overturning and falling.
3. Before using the manipulator and control device, please confirm the weight and steps according to the way described in the maintenance manual. If the operation is not performed in accordance with the prescribed technique, the manipulator and control device may tip over or fall during the handling procedure, resulting in an injury.
4. Wiring should be handled and installed with caution to avoid damage. Furthermore, when the device has been assembled, protective measures such as a protective cover should be adopted to avoid operator and forklift damage to the wire.
Hot Tags: four axis molding injection manipulator, China four axis molding injection manipulator suppliers, manufacturers, factory