BRTNN15WSS4PF
Product description:
High speed cartesian injection robot is a four axis servo manipulator for all types of horizontal injection molding machine ranges of 470T-800T to take-out products and cut the burrs of the products. Four axis AC servo driven, make it save time than similar models, it also has the features of fewer signal lines, long-distance communication, good expansion performance, strong anti-interference ability, high accuracy of repeated positioning, can simultaneously control multiple axes, simple equipment maintenance, and low failure rate.
Regarding the selection of the high speed cartesian injection robot, we should pay attention to several main principles:
1. Ensure that the length of the servo manipulator can reach the center of the mold to get the product.
2. Ensure that the shape and structure of the product enable the servo manipulator to smoothly remove the product.
3. Ensure that the properly installed servo manipulator can take the product over the safety door and place it at the designated location.
4. Ensure that the load capacity of the servo manipulator can meet the lifting and placing needs of the product and fixture.
5. Ensure that the operating speed of the servo manipulator can meet the production cycle of the injection molding machine.
6. Select a single arm or double arm servo manipulator based on the type of mold.
7. Fixed cutting number: Select the arm cutting number of the servo manipulator based on the height of the crown block or workshop.
8. 4-axis servo manipulators are selected according to production speed, position accuracy and durability requirements.
9. There are process requirements such as cooling, cutting nozzles, and metal inserts that can be completed by cooperating with different external fixtures.
High speed cartesian injection robot receiving posture
Harvesting posture: Single axis machine, place the main and auxiliary arms against the arch side, and lock the oil pressure buffer room components. Push the transverse part so that the distance between its origin sensor and the end face of the arch notch is approximately 45-60cm.
The recommended distance for BRTNN15WSS4P is 45-50cm.
Work procedures of high speed cartesian injection robot:
During the use of the equipment, with the increase of running time, the technical performance of each part and part is gradually deteriorated due to the influence of many factors such as friction, corrosion, wear, vibration, impact, collision and accidents.
Hot Tags: high speed cartesian injection robot, China high speed cartesian injection robot suppliers, manufacturers, factory