BRTR09WDS5P0F0
Product description:
The high accuracy servo manipulator arm is a straightforward and precise tool for managing production and cutting down on labor wastage. The entire apparatus uses a low-friction, long-lasting supporting chain to run the wire. To ensure stable operation and faster operation speed, it is powered by a servo motor. It use the advanced five-axis servo robot has a humanized operation controller that can switch between various languages at once, making it simple for clients to use.
Feature and function of high accuracy servo manipulator arm：
The product is appropriate for removing the finished item and nozzle from a 160T–320T horizontal injection molding machine. It is particularly well suited for the removal of typical plastic injection-molded products, including clear tables, tea tables, name card boxes, crystal lamps, crystal balls, picture frames, jewelry boxes, telescope lenses, TV screens, automobile lampshades, speaker panels, and other items.
Injection machine signal reset instructions
If robot arm is not in use, the injection machine signal can be reset in the following two ways:
When robot arm does not turn on the power, you can set "robot arm not used" under the system function.
The signal of the injection machine will not be controlled by the robot arm, if you want to use it, please press the "Reset" button.
Remove the metal connector that connects with the injection machine, and connect the "return connector" that comes with the machine. The wiring diagram of the "return connector" is as follows.
If robot arm is not in use, move the machine to a safe position outside.
5) The air source should be removed when robot arm is not in used.
Auto State setting of high accuracy servo manipulator arm:
Monitoring of Auto Run Data:
Turn the state selection switch to Auto, and the manipulator will enter the automatic standby state; press the start button again and the manipulator will start automatic operation. The operation data of the manipulator can be monitored under the automatic operation state. The Auto Run page is shown as follows:
Molding Cycle: Automatically record the molding cycle of the injection molding machine in the last cycle.
Picking Time: During Auto Run, start timing when there is mold opened signal until the close mold ON step is executed, that is, the time between OFF and ON of close mold signal.
Set Output: Currently set target number of products.
Good Product Quantity: Quantity of qualified products taken by the manipulator. (If there is no defective product signal before mold opened, the product is deemed as good).
Stack Quantity: The number of products the manipulator has stacked when using a stack.
Hot Tags: high accuracy servo manipulator arm, China high accuracy servo manipulator arm suppliers, manufacturers, factory, Traverse Beam manipulator, High Speed 5 Axis Robot Injection Molding Robot Arm, Three axis single arm manipulator, Five axis single arm manipulator, Automatic Industrial Robot Arm, Large injection molding manipulator