BRTR08TDS5PC
Product description:
High speed manipulator for injection is a five axis servo robotic arm developed by BORUNTE. It is suitable for the extraction of various horizontal injection molding machines of 50T~230T and the shearing of plastic products. The manipulator’s axis is driven by AC servo, with precise positioning, fast speed, and low failure rate. It can be applied to the rapid extraction of injection molded products. The robotic arm can work 24 hours without stopping, reducing labor costs while increasing production. Regularly and orderly product removal process can also improve product quality.
Issues to pay attention to during high speed manipulator for injection runtime:
1. Install safety circuits externally and add an additional maintenance route to ensure safe machine operation.
2. Before equipment, wiring, operation, and maintenance of the five axis servo manipulator, it is necessary to first understand the content of the machine manual. It is also necessary to be familiar with safety precautions related to mechanical and electronic knowledge when using it.
3. The five axis servo robotic arm should be installed on metal and other flame retardant materials. As the robotic arm is an electrically powered device, special attention should be paid to whether the equipment environment is far away from combustible materials and to clean up potential hazards.
4. When using a five axis servo robotic arm, it is necessary to ground it. The robotic arm is a large machine equipment, and for the sake of the user's personal safety, grounding can maximize the protection of operators from accidental damage.
5. It is necessary for the wiring operation of the five axis servo robotic arm to be carried out by professional electricians. The wiring is relatively messy and requires professional electronic knowledge operators to handle it, ensuring safe wiring.
6. During operation, operators should stand in a safe position and don't stand under the manipulators.
Program Process of high speed manipulator for injection：
1. Adjust the manipulator to the Auto state.
2. The manipulator runs to the home position and waits for the injection molding machine to open the mold.
3. Us the sucker 1 to take out the finished product.
4. The manipulator leaves the mold range through the movement of X and Y axes, and outputs the close mold permit signal after detecting the success of picking.
5. The manipulator places the material scraps and finished product to the designated position, respectively.
6. Every time a finished product is placed on the conveyor, start the conveyor to run for 3s.
7. The manipulator returns to the home point and stands by.
Hot Tags: high speed manipulator for injection, China high speed manipulator for injection suppliers, manufacturers, factory, High Quality 5 Axis Servo Robot, 2 Axis Die casting Servo Manipulator, high quality 5 axis servo manipulator, Single axis high precision manipulator, 2 Axis Die casting Robot, I M M ROBOT