BRTR13WDS5PC/FC
Industrial manipulator machine manufactures
Products Description
BRTR13WDS5PC/FC is a type of industrial manipulator, five axis AC servo drive, applies to all types of 360T-700T horizontal injection machine. It’s max loading is 10KG.
Maintenance safety of Industrial Manipulator Machine Manufactures:
(Caution) Before servicing the industrial manipulator, maintenance personnel should read the following safety regulations in detail to avoid danger.
1. Before checking the injection machine, please turn off the power.
2. Before adjustment and maintenance, please turn off the power of the injection machine and the manipulator and the
residual pressure of the manipulator.
3. Except for proximity switches, defective suction clamps, and solenoid valves that can be repaired by themselves,
others should be repaired by professionally trained personnel, otherwise do not modify them without authorization.
4. Please do not arbitrarily replace or change original parts.
5. During the adjustment or replacement of the mold, please pay attention to safety to avoid being hit by the robot.
6. After adjusting or repairing the robot, please leave the dangerous work area before testing.
7. During maintenance, do not turn on the power or connect the air pressure source to the manipulator.
Maintenance inspection items and expired
The inspection items and expiration dates are as follows, please implement them:
NO. | Range | Time |
1 | Check if the suction cups, clip and suction are functioning properly | Every day |
2 | Two-point combination (air source two piece) drainage | Every day |
3 | Fixture fixing screws | Every day |
4 | Air compressor drainage | Every day |
5 | Injection machine cable, operator connector cable | Every day |
6 | Check if the mechanism is loose | Every day |
7 | Pull-out guide rod, slide rail lubrication | Every week |
8 | Upper and lower rails, slider lubrication | Every mouth |
9 | Air pressure pipeline connection, whether speed adjustment is normal | Every mouth |
10 | Clean appearance | Every week |
11 | Check vacuum generator function | Every mouth |
12 | Inspection of base fixing screws | Every mouth |
13 | Hydraulic buffer checking | Every mouth |
14 | Air compressor and wire and cable replacement | Three years |
Note: When any abnormality of the machine is found, the machine must be stopped for inspection, and no abnormality can be checked before maintenance. The above table is for reference only.
Hot Tags: industrial manipulator machine manufactures, China industrial manipulator machine manufactures suppliers, manufacturers, factory, High Quality 5 Axis Servo Robot, Three Axis Single Arm Robot, 2 Axis Servo Robot, Heavy three axis servo robot arm, Single axis high precision manipulator, 2 axis servo manipulator