BRTR08TDS5PCFC
Product introduction:
Multi axis servo injection manipulator series apply to all types of 50T- 230T injection machine to taking out the plastic materials. Its traversed stroke is 1300mm and its crosswise stroke are P:430. R:430mm; 0.92 second taking out time and 4.55 sec cycle time make the productivity increase by 10-30%.
Instruct Screen in multi axis servo injection manipulator:
Turn the state switch to the Manual state, and then click "Instruct" to enter the program instruction page, as shown in the following figure:
Main Menu: The action menu divides the editing of program into 12 types. Click the corresponding button to enter the instruction page of corresponding action, and click "Main Menu" to return to the main page of instruction actions. (If there are no condition and sequence action buttons and no quick settings on the left side of instruction selection on the main menu, please set in the advance admin. For details, please refer to 4.2.9).
Edit: Select the action and click the "Edit" button to modify the parameters of the action.
Delete: Select the action and click the "Delete" button to delete the action. Compose: For example, if selecting X2 in figure above and clicking "Compose", the step order of X2 will become 3, and X2 and Z axes will start running simultaneously during auto operation.
Decompose: After decomposing two combined actions, they will run in order separately.
Function: Click the "Function" button to enter the function page, as shown in the following figure.
[Move Up]: If selecting the step 4 in figure above and clicking the "Move Up" button, the step will move up and the order will change to 3.
[Move Down]: If selecting the step 2 in figure above and clicking the "Move Down" button, the step will move down and the order will change to 3.
[Copy/Paste]: If selecting step 4 in figure above and clicking "Copy" button, and then selecting step 2 and clicking "Paste" button, step 4 will move above step 2
[Trail Operation]: Click an action and click "Trail Operation" to execute the action; and release the button to stop the action.
Warning: The trial function may not follow the sequence of procedures, so please pay attention to anti-collision when use!
Application case of multi axis servo injection manipulator:
This product is suitable for 50T-230T horizontal injection molding machine's finished products and water outlet to take out. It is especially suitable for small injection moulding objects such as plastic toys, toothbrushes, soap boxes, raincoats, tableware, utensils, slippers and other daily plastic items.
Hot Tags: multi axis servo injection manipulator, China multi axis servo injection manipulator suppliers, manufacturers, factory, 3 axis servo manipulator, High speed 5 Axis Servo Robot, 5 Axis Traverse Beam Robot, One Axis AC Servo Robot Arm, High speed three axis single arm manipulator, Automatic Industrial Robot Arm