BRTNG11WSS3PF
Product description:
BRTNG11WSS3PF applies to all types of horizontal injection 250T~480T for take out products. Horizontal servo manipulator for injection is driven by air pressure, which is characterized by convenient air source, rapid action, simple structure, low cost and easy maintenance.
Adjustment knob in horizontal servo manipulator for injection:
Function: When the manual position is adjusted accurately, you can use this knob to move the axis accurately.
Operation method: Click button, click to select the [Hand-wheel Selection] option, select the hand-wheel speed, select the axis to be fine-tuned, or press the axis button (on the hand controller) to be fine-tuned and then roll the fine-tuning knob to make The axis moves to the target point little by little.
Safe operation protocols of Horizontal servo manipulator for injection:
★ When programming within the movement region of manipulators, corresponding guard should be set to make sure that robot can be stopped under emergency circumstances. Please don’t wear gloves when teach and inch the robot. Please take the slow mode when inching the robot, in case emergency occurs and robot can be stopped efficiently.
★Operators must be familiar with the emergency stop buttons on the robot controller and periphery controller, to the degree that these buttons can be pressed exactly under emergency.
★Never think that static status of robot means the finish of program. Static robot is likely to receive the input signal to get moving
Hot Tags: horizontal servo manipulator for injection, China horizontal servo manipulator for injection suppliers, manufacturers, factory, High Precision Swing Arm Robots, High precision injection robot, High Speed Swing Arm Robots, , pneumatic robot, Pneumatic Manipulator