Borunte Robot Co., Ltd. is one of the most reliable manufacturers and suppliers of three axis manipulator for mold injection in China, also supports customized service with low price. Please feel free to wholesale advanced three axis manipulator for mold injection for sale here from our factory.
Three axis manipulator for molding injection
BRTNN11WSS3PF
Product description:
Three axis manipulator for mold injection apply to the 250T-800T type horizontal injection for taking out the plastic goods. Three axis drive and control system can simultaneously control multiple axes. It’s vertical stroke is 1100mm and max loading is 10kg.
Quality of three axis manipulator for mold injection：
1. By using the conveyor belt with a manipulator, the packaging personnel can concentrate on the quality control, and will not be distracted by taking the product or too close to the injection molding machine, which will affect the work.
2. The time for personnel to take the product is not fixed, which will cause product shrinkage and deformation (if the material pipe is too hot, it needs to be re injected, causing waste of raw materials, and the price of raw materials rises). The manipulator takes out the product at a fixed time to ensure the product quality.
3. The safety door shall be closed before the personnel take the product, which will shorten or damage the life of the molding machine and affect the production. The use of manipulator can ensure the injection quality and prolong the service life of the molding machine.
Safe operation protocols of three axis manipulator for mold injection：
★ When programming within the movement region of manipulators, corresponding guard should be set to make sure that robot can be stopped under emergency circumstances. Please don’t wear gloves when teach and inch the robot. Please take the slow mode when inching the robot, in case emergency occurs and robot can be stopped efficiently.
★Operators must be familiar with the emergency stop buttons on the robot controller and periphery controller, to the degree that these buttons can be pressed exactly under emergency.
★Never think that static status of robot means the finish of program. Static robot is likely to receive the input signal to get moving
Hot Tags: three axis manipulator for mold injection, China three axis manipulator for mold injection suppliers, manufacturers, factory, Industrial Swing Arm Robot for Injection Molding Machine, High precision injection robot, Pneumatic Manipulator, High Speed Swing Arm Robots, swing arm manipulator, pneumatic robot