BRTNG11WSS3PF
Product description:
BRTNG11WSS3PF is a type of industrial manipulator, an automatic three axis servo manipulator, which applies to all types of 250 T- 480 T horizontal injection machines. Its maximum loading is 2 kg, with 1150mm vertical stroke, 700mm crosswise stroke, and 1700 traverse stroke. It can simultaneously control multiple axes and has simple equipment maintenance.
Product functions and features of the automatic three-axis servo manipulator:
BRTNG11WSS3PF is applicable to all types of horizontal injection machine ranges of 250T- 480T for take-out products and sprue. It is especially suitable for taking out small injection molding objects, such as all kinds of earphone cable skin, earphone cable connector, wire skin and so on in electronic appliances.
Time modify:
In the Stop or Auto Page, Press "TIME" key can enter Time Modify page.
To alter the time, press the cursor keys for each step in the sequence. Once you've entered the new time, press Enter.
Delay time before action is the period after the action step. Until the delay time-out, the current action will be carried out.
If the switch to confirm is being used in the current phase of the sequence. The same amount of action time will be noted. The following action may be carried out until the action switch is confirmed after the timeout if the real action time cost exceeds the record.
Site crane demonstration of automatic three axis servo manipulator:
In the process of crane, the operator should wear a safety helmet, standardize the operation, and pay attention to safety. In the process of operation, the machine should be pushed away from pedestrians in time to avoid passing over the heads of pedestrians.
Length of hanging rope: 3.5-4 meters is appropriate, bearing: > 1 ton.
Switch in the manipulator
The status of the controller is divided into three types: manual, stop, and auto.
【Manual】：Turn the state selection switch to the left to enter the manual state
【Stop】：Turn the state selection switch to the middle to enter the stop state. in this state, you can set the parameters.
【Auto】：Turn the state selection switch to the right to enter the automatic state, in this state can be fully automatic and the corresponding settings.
Hot Tags: automatic three axis servo manipulator, China automatic three axis servo manipulator suppliers, manufacturers, factory, High Precision Swing Arm Robots, High Speed Swing Arm Robots, Pneumatic Manipulator, pneumatic robot, High precision injection robot, Industrial Swing Arm Robot for Injection Molding Machine