Hot selling product molding manipulator
BRTNN11WSS3P/F
Product description:
Hot selling products molding manipulator series apply to all types of 250T-480T injection machine to taking out the plastic materials. Its traversed stroke is 1700mm and its crosswise stroke is 700mm; 1.63 second taking out time and 6.15 sec cycle time make the productivity increase by 10-30%.
Main specifications of hot selling products molding manipulator:
|
Power source (KVA) |
Recommended IMM (ton) |
Traversed driven |
Model of EOAT |
|
2.59 |
250T-480T |
AC servo motor |
Two suctions two fixtures |
|
Traversed stroke (mm) |
Crosswise Stroke (mm) |
Vertical Stroke (mm) |
Max loading (kg) |
|
1700 |
700 |
1100 |
10 |
|
Dry take out time (sec) |
Dry cycle time (sec) |
Air Consumption (sec) |
Net weight |
|
1.63 |
6.15 |
3.2 |
261 |
Mounting Notice of hot selling products molding manipulator:
1: Electric field-licensed workers should carry out installations.
2: Before mounting, make sure the power is switched off.
3. Mount on metal and keep away from combustible items.
4. Verify the ground's safety connection.
5: The control system depends on the power supply. Avoid having contractors install controllers, transformers, and other AC accessories. Make sure your system is protected and has a reliable power source.
6: Before performing any installation, maintenance, or operation, read the manual. Operators need to be aware of the safety requirements in the mechanical and electrical fields.
7: The outside temperature is less than 50 °C. Use not permitted in cold or freezing areas.
Attention: Improper installation might result in hazard, including damage to equipment and bodily injury.
Hot Tags: hot selling products molding manipulator, China hot selling products molding manipulator suppliers, manufacturers, factory, Pneumatic Manipulator, High Precision Swing Arm Robots, High precision injection robot, pneumatic robot, High Speed Swing Arm Robots, swing arm manipulator