Axis Manipulators For Plastic Product Molding

Axis manipulators for plastic product molding

BRTNN11WSS3P/F 

   BRTNN11WSS3P/F series apply to the 250T-800T type horizontal injection for taking out the plastic goods. Three axis drive and control system can simultaneously control multiple axes. It's vertical stroke is 1100mm and max loading is 10kg.

A single wooden box is used to pack the home for the Axis manipulators. The bottom plate, which is joined to the inner package, carries the weight of the packing box. The inner package cannot move because of the bottom plate. The most stressed part of the crane or forklift is this one. The upper cover and shell of the box are only there for protection, and they can only support a certain amount of weight. No throwing anything on the packing box, no dumping, no water, etc.

1: Electric field-licensed workers should carry out installations.

2: Before installing, make sure the power is turned off.

3. Install on metal and keep away from combustible objects.

4. Verify the ground's safety connection.

5: The control system depends on the power supply. Avoid having contractors install controllers, transformers, and other AC accessories. Ensure that your system has a reliable power source and protection.

6: Before performing any installation, maintenance, or operation, read the manual. Operators need to be aware of the safety requirements in the mechanical and electrical fields.

7: The outside temperature is less than 50 °C. Use not permitted in cold or freezing areas.

Attention: Improper installation might result in hazard, including damage to equipment and bodily injury.

Hot Tags: axis manipulators for plastic product molding, China axis manipulators for plastic product molding suppliers, manufacturers, factory, Industrial Swing Arm Robot for Injection Molding Machine, pneumatic robot, High Precision Swing Arm Robots, swing arm manipulator, Pneumatic Manipulator, High precision injection robot