BRTYZGT02S2B
Product description：
The die casting machine auto ladle has a very simple design. It is applicable to 160 T~400 T die casting machines, with a recommended tablespoon type of 0.8 kg~4.5 kg. It adopts a brand-new integrated drive and control system, with fewer signal lines and a small footprint.
Manual Key of die casting machine auto ladle:
1. Arm Forward Key: Press and hold the key, arm arm arm arm arm forward action, release the key to stop.
2. Arm Back Key: Press and hold the key, arm arm arm arm arm back action, release the key to stop.
3. Take the Soup Key: Press and hold the key, the Soup Spoon to take action, and release the key to stop.
4. Add Soup Key: Press and hold the key, spoon to perform note soup action, release the key to stop.
5. Soup increasing Key: automatic operation, press the Tang Zeng Key can be fine-tuned to increase the amount of soup.
6. Soup Reduction Key: automatic operation, press the soup reduction key can be fine-tuned to reduce the amount of soup.
7. ON/OFF Key: you can switch between positive and negative values when entering parameters. All parameters are positive by default. Press ON/OFF key to enter negative values.
8. Parameter Key: In the stop/Manual State, press the parameter key to enter the manual parameter adjustment screen, the screen shows as follows:
Settings of die casting machine auto ladle:
1). Spoon take soup limit: manual state can run the maximum value of the Spoon, the cursor moved to this position can change the set value.
2). Arm forward position: the Maximum Value at which the arm can be run manually. Move the cursor to this position to change the setting value.
3). Reserve parameter 1: not yet open for use
4). Reserve parameter 2: not yet open for use
5). Inching Speed: set the manual speed in Inching mode. Move the cursor to this position to change the setting value.
6). Global Speed: the global speed of a servo motor in% .
7). For example: the global speed setting 80% , the soup arm forward speed setting 50% , then the actual soup arm forward speed is 80% * 50% = 40%
8). Origin velocity: the speed of the motor shaft at origin reversion.
9). Screen off time: the time the screen lights up when nothing is done to the hand controller.
Hot Tags: die casting machine auto ladle, China die casting machine auto ladle suppliers, manufacturers, factory