Description

We've been proud with the significant shopper fulfillment and wide acceptance due to our persistent pursuit of top of the range both of those on solution and repair for 5 Axis Assembly Robot, Six Axis Loading And Unloading Robot, Three Axis Single Arm Robot. Our main target is keeping the high quality and reliability of products for our customer. We hope we can have a chance work with the customers in domestic and overseas. We have always taken the vision of becoming the leader of the industry and the creator of social value.

BRTYZGT02S2B

Product lntroduction

Die-casting Manipulator is a product with a very simple design. It adopts a brand-new integrated drive and control control system, with fewer signal lines and a small footprint. Our product uses a portable handheld operating device, the parameters and function settings are clear at a glance, and the operation is simple and fast. When the arm is driving, the speed of the arm can be controlled by the knob, and it can be switched between high and low speed. Compared with other robotic arms, Die-casting Manipulator is simpler overall and uses less space.

Product parameter(specification)

Model	Tableapoon Max	Recommended height for smelter	Recommended height for smelter arm	Cycle Time	Main control power	Power Capacity	Dimension
BRTYZGT02S2B	350mm	≤1100mm	≤450mm	6.23s	AC220V/50HZ	1.7KVA	11406801490mm

Basic configuration

1. 4.3 inch color display operation panel;

2. Drive control integrated control box;

3. Power supply; (50 w to 100 w)

4. Servo motor (750W 750W, subject to the actual configuration);

5. Brake resistance;

6. UVW power line, encoder line;

7. Transformer

8. Fan

9. Safety door (out of the machine accessories)

10. Connection of die-casting machine (outgoing accessories)

Matters needing attention

1. Wiring operation must be carried out by professional electricians, and the operation can only start after confirming the power supply is disconnected.

2. Please install it on metal and other flame retardants and stay away from combustible materials.

3. Be sure to connect the grounding terminal with the ground wire, otherwise it will cause electric shock or fire.

4. If the external power supply is abnormal, the control system will fail. In order to make the control system work safely, please be sure to set the safety circuit outside the control system.

5. When installing the electronic board, it should avoid too close to the contactors, frequency converters and other AC devices to avoid unnecessary surge interference.

6. The installation of the controller's electric box, should have good ventilation, oil, dustproof conditions. If the electric control box is closed, it is easy to make the temperature of the controller too high, which will affect the normal work. An exhaust fan must be installed. The appropriate temperature in the electric box is below 50℃, and it should not be used in places with condensation and freezing.

Hot Tags: die-casting manipulator, China die-casting manipulator suppliers, manufacturers, factory, Traverse Beam manipulator, 6 Axis Assembly Robot, High Speed Servo Robot Arm for Injection Molding Machine, 4 Axis Robot, Automatic Injection Molding Machine Manipulator, 6 Axis Robot

Technical Parameters

Pursuing excellence is the core value of our Good Quality Automatic Die Casting Robot, which lays the foundation for corporate development. We strive to secure the core competitive advantages of resources and marketing channels, actively promote the organic combination of trade, industry and capital, and continuously improve corporate value. We strive to produce new products that are suitable for marketing to enter the international market.