BRTR07WDS5PCFC:
Product description:
Advanced injection molding robot is an advanced industrial automation technology which is designed to amp up production capacity and improve accuracy. With fast movement and precise positioning performance, it can reduce the cycle time and increase output while also improving product quality. It is also highly flexible, enabling it to handle a variety of tasks quickly and efficiently.
Three advantages of installing advanced injection molding robot:
1. Accurate positioning, high speed, long life, and low failure rate.
2. After installing the manipulator can increase production capacity (10-30%) and will reduce the defective rate of products, ensure the safety of operators, and reduce manpower.
3. Accurately control production, reduce waste and ensure delivery. Five-axis driver and controller integrated system: fewer signal lines, long-distance communication, good expansion performance, strong anti-interference ability, high accuracy of repeated positioning, multi-axis can be controlled at the same time, simple equipment maintenance, and low failure rate.
Product main technical parameters:
|
Power Source(KVA) |
Recommended l.M.M (ton) |
Traverse Driven |
Model of EOAT |
|
3.32 |
50T-200T |
AC Servo motor |
four suctions two fixtures |
|
Traverse Stroke (mm) |
Crosswise Stroke (mm) |
Vertical Stroke (mm) |
Max.loading (kg) |
|
1300 |
P:300-R:125 |
750 |
3 |
|
Dry Take Out Time (sec) |
Dry Cycle Time (sec) |
Air Consumption (NI/cycle) |
Weight(KG) |
|
1.32 |
4.95 |
4 |
230 |
Precautions for Storage and Handling of advanced injection molding robot:
Caution: Do not store or place the machine in the following environment, otherwise it may cause fire, electric shock or machine damage.
Places exposed to direct sunlight, places where the ambient temperature exceeds the storage temperature conditions, places where the relative humidity exceeds the storage humidity, or places with large temperature differences or condensation.
Places close to corrosive gas or flammable gas, places with a lot of dust, salt and metal dust, places where water, oil and medicine drip, and places where vibration or shock can be transmitted to the subject. Please do not grab the cable for transportation, otherwise it will cause damage or failure of the machine.
Do not stack too much products on the machine, otherwise it may case machine damage or fail.
Hot Tags: advanced injection molding robot, China advanced injection molding robot suppliers, manufacturers, factory, Single axis servo manipulator, robot arm for injection molding machine, three axis high speed positioning precise manipulator, Automatic Injection Molding Machine Manipulator, 5 Axis Die casting Robot, 1 Axis Dual Robot