Borunte Robot Co., Ltd. is one of the most reliable manufacturers and suppliers of manipulator arm for machine 750t-1200t in China, also supports customized service with low price. Please feel free to wholesale advanced manipulator arm for machine 750t-1200t for sale here from our factory.
Manipulator arm for machine 750T-1200T
BRTR17WDS5PCFC
Product descriptions:
BRTR17WDS5PCFC series applies to all types of 750T-1200T injection machine for taking out the plastic materials. Its traversed stroke is 1700mm and its crosswise stroke is P:920mm R:920mm; 3.72 seconds taking out time and 12.72 seconds cycle time make the productivity increase by 10-30%.
Features of manipulator arm for machine 750T-1200T
AC servo drive injection molding robot equipped with five-axis drive and control system, which makes it have fewer signal lines, long-distance communication, good expansion performance, strong anti-interference ability, high accuracy of repeated positioning, multi-axis can be controlled at the same time, simple equipment maintenance, and low failure rate.
Maintenance notice:
Maintenance staff should carefully read the following safety standards before servicing the manipulator to reduce risk:
1. Please shut off the power before inspecting the injection machine.
2. Please turn off the power to the injection machine, the manipulator, and any other devices before performing any adjustments or maintenance.
remaining force applied by the manipulator
3. With the exception of proximity switches, broken suction clamps, and solenoid valves that can be self-repaired,
Others should only be repaired by qualified professionals; do not alter them without permission.
4. Original parts should not be haphazardly changed or replaced.
5. Please pay attention to safety when adjusting or replacing the mold to prevent getting hit by the robot.
6. Before testing, please vacate the hazardous work area after modifying or fixing the robot.
Maintenance safety countermeasures of manipulator arm for machine 750T-1200T:
①When installing the accessory parts on the end and manipulator, the size and quantity of bolts specified in this book shall be strictly observed. The bolts shall be tightened with torque wrench according to the specified torque, and the bolts with rust or dirt shall not be used.
②When designing and manufacturing the end fixture, it should be controlled within the allowable load range of the manipulator.
③The fault safety protection structure shall be adopted to separate man from machine. Even if the power supply or compressed air supply is cut off, the holding object will not be released or fly out. The corner or protruding part shall be treated to prevent damage to people and objects.
Hot Tags: manipulator arm for machine 750t-1200t, China manipulator arm for machine 750t-1200t suppliers, manufacturers, factory, One Axis AC Servo Robot Arm, high speed 3 axis servo manipulator, Three Axis Single Arm Robot, Five axis single arm manipulator, 2 Axis Die casting Robot, High Speed Servo Robot Arm for Injection Molding Machine