BRTR17WDS5PCFC
Products Description
Parallel automatic material taking manipulators is used for in-mold labeling and in-mold inserting application, five axis driver and control system has the advantages of less signal lines and high accuracy of repeated positioning, which can avoid failures.
Tips for using the manipulator:
1. Time modify of parallel automatic material taking manipulators:
In the Stop or Auto Page, Press “TIME” key can enter Time Modify page.
To alter the time, press the cursor keys for each step in the sequence. Once you've entered the new time, press Enter.
Delay time before action is the period after the action step. Until the delay time-out, the current action will be carried out.
If the switch to confirm is being used in the current phase of the sequence. The same amount of action time will be noted. The following action may be carried out until the action switch is confirmed after the timeout if the real action time cost exceeds the record.
2. Installation notice of parallel automatic material taking manipulators:
a: Electric field-licensed workers should carry out installations.
b: Before installing, make sure the power is turned off.
c. Install on metal and keep away from combustible objects.
d. Verify the ground’s safety connection.
e: The control system depends on the power supply. Avoid having contractors install controllers, transformers, and other AC accessories. Make sure your system is protected and has a reliable power source.
f: Before performing any installation, maintenance, or operation, read the manual. Operators need to be aware of the safety requirements in the mechanical and electrical fields.
g: The outside temperature is less than 50℃. Use not permitted in cold or freezing areas.
Attention: Improper installation might result in hazard, including damage to equipment and bodily injury.
Hot Tags: parallel automatic material taking manipulators, China parallel automatic material taking manipulators suppliers, manufacturers, factory, Single axis high precision manipulator, Single axis servo manipulator, Five axis single arm manipulator, 3 Axis Positioning Precision Robot, 5 Axis Traverse Beam Robot, 1 Axis Dual Robot