BRTV09WDS5P0F0
Product description:
servo manipulator for moulding injection uses five-axis driver and controller integrated system: fewer signal lines, long-distance communication, good expansion performance, strong anti-interference ability, high accuracy of repeated positioning, can simultaneously control multiple axes, simple equipment maintenance, and low failure rate.
Main Specification of servo manipulator for moulding injection:
|
Power Source(KVA) |
Recommended l.M.M (ton) |
Traverse Driven |
Model of EOAT |
|
3.4 |
120T-320T |
AC Servo motor |
two suctions two fixtures |
|
Traverse Stroke (mm) |
Crosswise Stroke (mm) |
Vertical Stroke (mm) |
Max.loading (kg) |
|
Within 6m |
Pending |
900 |
5 |
|
Dry Take Out Time (sec) |
Dry Cycle Time (sec) |
Air Consumption (NI/cycle) |
Weight(KG) |
|
1.7 |
pending |
9 |
Non standard |
Model representation: W：Telescopic type. D：Product arm + runner arm. S5:Five-axis driven by AC Servo Motor( Traverse-axis,Vertical-axis+Crosswise-axis ).
The above-mentioned cycle time are the results of our company's internal test standard. In the actual application process of the machine, they will vary according to the actual operation.
Axial Definition of servo manipulator for moulding injection:
Z axis: Traverse in/out axis of the manipulator.
X1 axis: Forward/backward axis of main arm of themanipulator.
Y1 axis: Up/down axis of main arm of the manipulator.
X2 axis: Forward/backward axis of assistant arm of the manipulator.
Y2 axis: Up/down axis of assistant arm of the manipulator.
C axis: Horizontal/vertical axis of main arm fixture of the manipulator.
B axis: Rotation axis of the manipulator fixture.
A axis: Horizontal/vertical axis 2 of main arm fixture of the manipulator.
Operation Mode:
The manipulator has three operation statuses, i.e. Manual, Stop and Auto. Turn the state switch to the left to enter Manual state, and the operator can manually operate the manipulator; turn the state switch to the middle to enter the Stop state, and the manipulator will stop all operations, except the origin reset and parameter setting of the manipulator; turn the state switch to the right and press the "Start" button once, and the manipulator will enter.
Hot Tags: servo manipulator for moulding injection, China servo manipulator for moulding injection suppliers, manufacturers, factory, Three Axis AC Servo Industrial Manipulator, 2 axis servo manipulator, Large 5 axis manipulator, 5 axis die casting manipulator, 3 Axis Positioning Precision Robot, High speed 3 Axis Servo Robot