Borunte Robot Co., Ltd. is one of the most reliable manufacturers and suppliers of fast speed servo molding manipulator in China, also supports customized service with low price. Please feel free to wholesale advanced fast speed servo molding manipulator for sale here from our factory.
BRTN24WSS5PCFC
Product introduction:
With a 2400mm vertical stroke and compatibility with plastic injection molding machines weighing between 1300 and 2100 tons, fast speed servo molding manipulator is typically used for quick injection or injection at complex angles. Particularly suitable for items with long shapes, such as vehicles, washing machines, and home appliances. A 24-hour nonstop production system minimizes the number of workers, which significantly lowers labor costs. Also, it makes a significant contribution to lowering product flaws and obtaining high quality levels.
System Installation of fast speed servo molding manipulator:
1. Wiring work must be performed by a professional electrician.
2. Make sure the power is disconnected before starting the operation.
3. Please install it on flame-retardant materials such as metal and keep away from combustible materials.
4. It must be safely grounded when used.
5. If the external power supply is abnormal, the control system will fail. In order to make the whole system work safely, please be sure to set the safety circuit outside.
6. Before installation, wiring, operation and maintenance, the operator must be familiar with the content of this manual. It is also necessary to fully understand the relevant mechanical and electronic knowledge and all related safety precautions.
7. The electric control box for installation of the controller should be well ventilated, oil-proof and dust-proof. If the electric control box is airtight, the temperature of the controller is likely to be too high, which will affect the normal work. Therefore, an exhaust fan must be installed. The suitable temperature in the electric control box is below 50°C. Do not use it in places with condensation and freezing.
8. The controller should not be installed too close to the contactor, transformer and other AC accessories to avoid unnecessary surge interference. Caution: Improper handling may cause hazards, including personal injury or machine accidents.
Work procedures of fast speed servo molding manipulator:
During the use of the equipment, with the increase of running time, the technical performance of each part and part is gradually deteriorated due to the influence of many factors such as friction, corrosion, wear, vibration, impact, collision and accidents.
Hot Tags: fast speed servo molding manipulator, China fast speed servo molding manipulator suppliers, manufacturers, factory, robot arm for injection molding machine, 2 Axis Die casting Robot, I M M ROBOT, industrial robot manipulator, Five axis Dual arm Manipulator, Three Axis AC Servo Industrial Manipulator