This website information is not updated in a timely manner. For the latest product information, please refer to BORUNTE official website: www.borunte.top

Specific Manipulator For Injection

Specific Manipulator For Injection

Accurate positioning, high speed, long life, and low failure rate. After installing the manipulator can increase production capacity (10-30%) and will reduce the defective rate of products, ensure the safety of operators
Send Inquiry
Description

Borunte Robot Co., Ltd. is one of the most reliable manufacturers and suppliers of specific manipulator for injection in China, also supports customized service with low price. Please feel free to wholesale advanced specific manipulator for injection for sale here from our factory.

 

BRTR08TDS5PCFC

Product description:

Specific manipulator for injection for taking out product ranges of 50T-230T for taking out items apply to advanced manipulator. Integrated control system for a five-axis AC servo drive that has too few signal lines, long-distance communication, excellent expansion performance, powerful anti ability, high repeatability of positioning, the ability to control multiple axes simultaneously, easy equipment maintenance, and a lower failure rate. Accurate positioning, high speed, long life, and low failure rate. After installing the manipulator can increase production capacity (10-30%) and will reduce the defective rate of products, ensure the safety of operators, and reduce manpower. Accurately control production, reduce waste and ensure delivery.

Specific manipulator for injection receiving posture:

Receiving posture: push forward arm and close the arm against arch side. Push the transverse part so that the distance between the origin sensor and the end face of arch incision is about 70-80cm. The limit block is locked at both ends of the arch surface to prevent the pull-out and arm sliding.

 

product-473-451 product-473-451

Knowledge of product maintenance:

Whether the suction of the vacuum generator and its regulating device and the tracheal end of the vacuum production line device meet the requirements and whether the suction is kept at about -12.5 value. Whether the regulating valve device is in good condition and whether the airflow can be adjusted normally.

Check the tightness of nuts and bolts of specific manipulator for injection:

 

Due to the long time of intense operation, the relaxation of nuts and bolts is one of the main reasons for the failure of the manipulator.

 

1. Fasten the mounting bolts of the limit switches at the transverse part, the drawing part and the front and side arms.

 

2. Confirm the tightness of the terminal in the terminal box of the relay point position between the moving body part and the control box.

 

3. Fastening of each brake device

 

4. Whether there are loose bolts to avoid damage to other equipment.

 

Hot Tags: specific manipulator for injection, China specific manipulator for injection suppliers, manufacturers, factory, High Precision Five Axis Sevor Manipulator, three axis high speed positioning precise manipulator, General purpose Injection Molding Robot, 5 axis die casting manipulator, 2 Axis Die casting Robot, Single Axis Servo Robot