Two Axis Robot For Pouring Hot Metal

two axis robot for pouring hot metal

BRTYZGT04S2B

     Working with 400T-800T die casting machine, its max loading is 6kg and the recommended ladle loading is 4.5kg-6kg, its max span is 450mm. Light weight: 230kg. Mainly used for pouring the hot metal liquid and other kind of hot liquid. Using this robot, workers could keep away from hot liquid so that to protect the safety of worker.

1. The action is smooth, the amount of soup is stable and accurate, and the operation is convenient.

2. The stop precision of the soup injection position is high, the soup is given by one arm, the soup quantity is fixed, and the defective rate of finished products is low.

3. AC servo motor, suitable for long time operation.

4. It is suitable for use in harsh environment and safe.

    Plug the USB stick into the USB port on the right hand side of the control, press the Emergency Stop Button, power off and restart, go to the home page, then go to the 2014 password page to check the version number is correct (you can not pull out the USB stick before entering the home page.

Insert the Thumb Drive, click Key into the program page, follow these steps to upgrade:

(1) refresh: click the "Refresh" button on the right, if no USB flash drive is detected, the left side of the light is still gray; detected USB drive, the left side of the light is green, and then click the update button.

(2) update: if the left light turns green to red, the running light on the host is flashing at a high rate and the percentage of system updates that occur is moving. If the percentage changes to 100% , the program is updated and a prompt appears at the bottom of the screen (update complete!) .

(3) pop-up: then click the pop-up button, pop-up has been inserted U disk, the left light from red to gray. At this point you can pull out the U disk, the end of the host update.

* Note: 1. The host program update time is approximately 2 minutes. Once you hit the pop-up Button or unplug the USB Stick, you must restart the system to refresh the detected USB stick again.

Hot Tags: two axis robot for pouring hot metal, China two axis robot for pouring hot metal suppliers, manufacturers, factory