BRTNG09WSS3PF
Product description:
The vertical arm of a light payload servo manipulator is of the telescopic design with a product arm. The manipulator will enhance production by 10% to 30% after installation, lower product failure rates, guarantee operator safety, require fewer staff, and precisely manage output to cut down on waste. Fewer signal lines, long-distance communication, good expansion performance, strong anti-interference ability, high positioning repeatability, ability to simultaneously control multiple axes, simple equipment maintenance, and low failure rate are all advantages of the three-axis driver and controller integrated system.
Mounting notice of light payload servo manipulator:
1. Only licensed electricians should perform installations.
2: Make sure the power is off before installing.
3. Mount on metal and keep clear of combustible materials.
4. Check the safety connection to the ground.
5: The power source affects the control system. Be away from hiring professionals to install transformers, controllers, and other AC accessories. Make sure your system is protected and has a dependable power source.
6: Before doing any installation, maintenance, or operation, read the handbook. Operators must be informed of the mechanical and electrical industries' safety regulations.
7: The temperature outside is below 50 °C. Usage is not allowed in frigid or freezing climates.
Attention: Poor installation could lead to hazards like equipment damage and physical harm.
General safety measures of the light payload servo manipulator:
Note that while using:
1. This product is intended for general industrial use and not for use in machinery or systems that are connected to human life.
2. Please equip a safety device if it is applied to a device that could result in serious accidents or property damage due to a product failure.
3.Be aware that if it is used in an environment with a high concentration of sulfur or sulfide gas, the chip resistor's wire may break or the point contact may deteriorate as a result of sulfurization.
4.Smoke and fire may result from internal component damage if the input voltage is significantly higher than the power supply of the product's rated range. For this reason, pay close attention to the input voltage.
5.Please be aware that this product cannot be used outside of its intended range.
6. Because we are committed to enhancing our products continuously, the company may alter some machine parts.
Hot Tags: light payload servo manipulator, China light payload servo manipulator suppliers, manufacturers, factory, High precision injection robot, pneumatic robot, High Precision Swing Arm Robots, swing arm manipulator, Industrial Swing Arm Robot for Injection Molding Machine, High Speed Swing Arm Robots