1. Before the installation of robot automation equipment, they should receive the training and certification from the manufacturer to understand the relevant professional knowledge of the product and avoid accidents.
2. Before formally operating the handling robot, the operator must conduct a preliminary inspection of the equipment, such as whether the equipment can operate normally, whether the power lines are connected correctly, whether there are obstacles at the work site, and whether the mechanical parts are loose.
3. Check whether the oil volume of the oil tank is sufficient. If the oil is running out after installation, it will not only cause the abnormality or damage of the cylinder, but also cause the overall failure of the stacker.
4. Pay attention to the posture of the robot during handling to ensure that the center of gravity of the robot will not change; Use eyebolts and designated transportation equipment for transportation. Move and handle with care. Do not let the setting surface of the lower part of the robot collide strongly with the ground.
5. Do not transport by means other than the specified transport equipment and methods.
6. When using a forklift, fix the robot in the tray with a valve, push the fork of the forklift into the tray and carry it; The handling process shall be operated at low speed.
7. Please do not lean on the body of the robot during handling.
