Which industries would use welding robots for processing?
With the rapid development of robot technology and automation technology, more and more industries will use welding robots for daily processing. At the same time, the robot can work in dangerous and harmful environment, which can effectively improve the production environment and safety. In addition, which welding robots will be used by the processing industry?
The general processing industry will use BORUNTE robots for daily processing, and our robots have a rectangular configuration. And these robots have three prismatic joints that can shake on three vertical axes to transmit linear motion. Secondly, flexible configuration enables it to meet specific application requirements.
Before robots were popularized on a large scale, factories completed daily truss work by manual welding. This is not only time-consuming and laborious, but also can not improve the processing efficiency of the factory. However, with the continuous progress and completion of technology, robot technology has been popularized and developed accordingly. Therefore, more and more factories will choose to use truss robots for daily processing, and our robots can automatically and quickly complete daily processing.
The welding unit in the general truss robot is composed of three professional welding robots, and each robot has its own welding equipment. And also has a professional truss positioner, so that it can continuously send the truss to be welded by the robot. Then, the operator needs to put the appropriate steel parts constituting the truss into the positioner fixture, and then the robot will start the daily processing.
Secondly, after the robot completes the assigned program, the controller of the robot will seek the ready signal from the operator station. When the signal is sent, the robot will index the positioner and start the next welding procedure. And at this point, the operator can remove the welded truss assembly before loading the parts for the next assembly.