BRTNN11WSS3PF
Product description:
Three axis mold injection robot is work for the 250T~480T horizontal molding injection machine for taking out goods. It has a 1100mm telescopic type vertical arm with a product arm. It's max loading is 10kg, suitable for vary type of products, after installing this robot, the productivity will be increased by 10-30% will reduce the defective rate of products, ensure the safety of operators, reduce manpower and accurately control the output to reduce waste. Three axis driver system's advantages: less signal lines, long-distance communication, good expansion performance, strong anti-interference ability, high accuracy of repeated positioning, can simultaneously control multiple axes, simple equipment maintenance, and low failure rate.
Main Specification of three axis mold injection robot:
|
Power Source(KVA) |
Recommended l.M.M (ton) |
Traverse Driven |
Model of EOAT |
|
2.59 |
250T-480T |
AC Servo motor |
two suctions two fixtures |
|
Traverse Stroke (mm) |
Crosswise Stroke (mm) |
Vertical Stroke (mm) |
Max.loading (kg) |
|
1700 |
700 |
1100 |
10 |
|
Dry Take Out Time (sec) |
Dry Cycle Time (sec) |
Air Consumption (NI/cycle) |
Weight(KG) |
|
1.63 |
6.15 |
3.2 |
261 |
Model representation: W: Telescopic type. S:Product arm. S3: Three-axis driven by AC Servo Motor(Traverse-axis,Vertical-axis + Crosswise-axis)
The above-mentioned cycle time are the results of our company's internal test standard. In the actual application process of the machine, they will vary according to the actual operation.
|
A |
B |
C |
D |
E |
|
1495 |
2727 |
1100 |
513 |
1700 |
|
F |
G |
H |
I |
J |
|
/ |
141 |
/ |
/ |
1002 |
|
K |
L |
M |
N |
|
|
/ |
208 |
222 |
700 |
Issues require to notice of three axis mold injection robot:
The following content addresses the issues that must be addressed during the manipulator handling operation. Before proceeding, please ensure that you fully comprehend the following information:
1. Personnel certified for hook, hoisting, and forklift operations must handle manipulators and controls. Carrying out operations by individuals who lack the necessary expertise might lead to accidents such as overturning and falling.
2. Before using the manipulator and control device, please confirm the weight and steps according to the way described in the maintenance manual. If the operation is not performed in accordance with the prescribed technique, the manipulator and control device may tip over or fall during the handling procedure, resulting in an accident.
3. Wiring should be handled and installed with care to avoid damage. Furthermore, after the device has been assembled, protective measures such as a protective cover should be implemented to avoid damage to the wire by operators and forklifts.
Hot Tags: three axis mold injection robot, China three axis mold injection robot suppliers, manufacturers, factory, High precision injection robot, High Precision Swing Arm Robots, High Speed Swing Arm Robots, Industrial Swing Arm Robot for Injection Molding Machine, swing arm manipulator, pneumatic robot