What are the molds suitable for BORUNTE manipulator
As a manufacturer of BORUNTE manipulator, only by understanding what kind of mold is suitable for manipulator, can we better introduce our products to customers and design the manipulator required by customers according to customers' products and requirements. Let's learn about several molds suitable for BORUNTE manipulator:
NO.1 Two plate die
(1) Automatic demoulding
a. Clamp the material head and separate the material head (clamp the material head to make the finished product fall off automatically and separate the finished product and the material head).
b. Separate the finished products in different conditions (clamp the material head, suck or hold the finished products, and separate the finished products from the material head).
c. Suck or hold the finished product and separate the finished product (suck or hold the finished product and let the material head fall off automatically to separate the finished product and the material head).
(2) Manual demoulding
a. Clamp the material head (the finished product is connected with the material head, and then manually separate the finished product and the material head after being taken out by the manipulator).
b. Suck or hold the finished product (the finished product is connected with the material head, and the finished product is sucked or held by the manipulator).
c. Clamp the material head, suck or hold the finished product (when the finished product and material head are ejected from the top, the finished product and material head have been separated.
d. After being taken out by manipulator, the material head and finished product can be placed in different places).
NO.2 Three plate die
(1) The finished product can fall off automatically, and the material head cannot fall off automatically
a. When the material head is clamped, the finished product will automatically fall off and separate the finished product from the material head (single arm manipulator).
b. The finished product arm sucks or holds the finished product, the material head arm clamps the material head, and uses the manipulator to separate the finished product from the material head.
(2) The finished product and material head shall not fall off automatically
a. The finished product arm sucks or holds the finished product, and the material head arm clamps the material head.
b. The material head arm clamps the material head, and the finished product arm sweeps the finished product to achieve the automatic demoulding mode to separate the finished product from the material head.